PN100/PN100A/MMBT100/MMBT100A
NPN General Purpose Amplifier
• This device is designed for general purpose amplifier applications at collector currents to 300mA.
MCR100 Series
Sensitive Gate
Silicon Controlled Rectifiers
Reverse Blocking Thyristors
PNPN devices designed for high volume, line-powered consumer applications such as relay and lamp drivers, small motor controls, gate drivers for larger thyristors, and sensing and detection circuits. Supplied in an inexpensive plastic TO-226AA package which is readily adaptable for use in automatic insertion equipment.
Features:
• Sensitive Gate Allows Triggering by Microcontrollers and Other
Logic Circuits
• Blocking Voltage to 600 V
• On−State Current Rating of 0.8 Amperes RMS at 80°C
• High Surge Current Capability − 10 A
• Minimum and Maximum Values of IGT, VGT and IH Specified
for Ease of Design
• Immunity to dV/dt − 20 V/ sec Minimum at 110°C
• Glass-Passivated Surface for Reliability and Uniformity
BC639
NPN Silicon AF Transistors
● High current gain
● High collector current
● Low collector-emitter saturation voltage
● Complementary types: BC 636, BC 638, BC 640 (PNP)
Thursday, 29 March 2012
Buying PN100-Problem encountered
Could not find component : PN100
Project Circuit Diagram
Figure above are the circuit diagram for the project. The transistor PN100 was labeled Q1,Q2 and Q3.
Above are the picture for the PN 100. This device is designed for general purpose amplifier applications at collector currents to 300 mA. This transistor are working together with the 555 timer to detect the mains fails and also act as the trigger for the 555 timer which is also IC1.We could not find the transistor. There are several number type of transistor suggested by the electronic dealer which is MCR100, BC639 and C9013. We have to do some research before proceeding.
Project Circuit Diagram
Figure above are the circuit diagram for the project. The transistor PN100 was labeled Q1,Q2 and Q3.
Designing PCB
Trying to design the PCB by using software such as DipTrace and Proteus but failed. There are no STP16NF06 found in the library. Basically, the function of the STP16NF06 is as a switch. Whenever it in OFF state, the emergency light will also in OFF state.
Problem encountered
Unable to locate this components in the software's library.
- STP16NF06
Subscribe to:
Posts (Atom)